PEC ME / M.Tech Admission 2014 – Master of Engineering Institutes, M.Tech. / M.E.

PEC University of Technology, a premier institution of Northern India, offers Master of Engineering Programmes which are at par with the programmes offered by reputed national and international institutes.

A  limited number of seats in each programme are available for the part time students for whom the duration of the programme shall be  three years.

  1. The institute will conduct online admissions to all its ME programmes from the academic session 2014-15.
  2. More information about the admissions will be available in the month of June 2014.
  3. There will be a common engineering proficiency test (EPT) for all the Non-Gate candidates.

PEC offers Two years (four semesters) full time programmes leading to the Degree of Master of Engineering are offered  in the following disciplines listed below in table:

The Seats Distribution for the academic session 2014-15 will be as under :

S. No.M. E. ProgrammeSCSTPwDGen.TotalSupernumerary Seats
Candidates sponsored by   Central/State Govt. Autonomous bodies/Public Ltd. Companies/AICTE recognized   institutesPart-time
1.Civil   Engineering (Structures)321*121832
2.Civil   Engineering (Transportation Engg.)311*131832
3.Civil   Engineering (Water Resources Engg.)311*141832
4.Computer   Science & Engg.421*182532
5.Computer   Science & Engg. (Information Security) (on self-supporting basis)321*202532
6.Electrical   Engineering421*182532
7.Electronics   Engineering421*182532
8.Electronics   (VLSI Design)311*131832
9.Environmental   Engineering211*151832
10.Industrial   Design (on self-supporting basis)210151832
11.Industrial   Materials and Metallurgy Engineering320121832
12.Mechanical   Engineering420182532
13.Production   and Industrial Engineering320121832
14.Total   Quality Engineering and Management (TQEM) (on self-supporting basis)21015183-
              TOTAL432292132874226

*on rotation basis

Eligibilty Conditions and Qualifying GATE papers.

S. No.M. E. ProgrammeB.E/B.Tech or equivalent** in the branches    mentioned below.Basis of Inter-se merit(Code) Eligible GATE papers
 1Civil Engineering. (Transportation Engg. )Civil EngineeringGATE Score
Entrance    test for non-GATE candidates
CE (Civil Engineering)
 2Civil Engineering (Water Resources Engg.)Civil EngineeringGATE Score
Entrance    test for non-GATE candidates
CE (Civil Engineering)
 3Civil Engineering (Structures)Civil EngineeringGATE Score
Entrance    test for non-GATE candidates
CE (Civil Engineering)
 4Environmental EngineeringCivil Engineering / Environmental    Engineering/ Agricultural Engineering / Chemical Engineering /       BiotechnologyGATE Score
Entrance    test for non-GATE candidates
CE (Civil Engineering)
AG (Agricultural Engineering )
CH  (Chemical    Engineering)
BT (Biotechnology)
 5Mechanical EngineeringMechanical / Aeronautical / Production /    Production & Industrial Engineering/ Aerospace EngineeringGATE Score
Entrance    test for non-GATE candidates.
ME(Mechanical Engineering)
AE    (Aerospace Engineering )
PI    (Production and Industrial Engineering )
 6Electrical    EngineeringElectrical    Engineering / Electrical and Electronics EngineeringGATE Score
Entrance    test for sponsored /Part time  non-GATE     candidates.
EE (Electrical Engineering
 7Electronics    EngineeringElectronics & Electrical    Communication Engineering./ Electronics & Communication Engineering/
Electronics    & Tele-communication Engineering
GATE Score
Entrance    test for sponsored /Part time     candidates.
EC (Electronics and communication    Engineering )
 8Electronics    (VLSI Design)Electronics & Electrical    Communication Engineering./ Electronics & Communication Engineering/
Electronics    & Tele-communication Engineering
GATE Score
Entrance    test for sponsored /Part time     candidates.
EC (Electronics and communication    Engineering )
 9Computer    Science & EngineeringComputer    Science & Engineering/ Information TechnologyGATE Score
Entrance test    for sponsored /Part time  candidates.
CS (Computer Science and    Information Technology)
 10Industrial    Materials and MetallurgyMetallurgy/    Materials Engineering/ Mechanical Engineering / Production Engineering / MSc    Material Science.GATE ScoreEntrance    test for non-GATE candidatesMT (Metallurgical Engineering)
ME(Mechanical    Engineering)
PI (Production and Industrial Engineering )
XE – C (Material Science)
 11Production    & Industrial EngineeringProduction/Industrial/     Production & Industrial/    Mechanical EngineeringGATE Score
Entrance    test for non-GATE candidates
PI (Production and Industrial Engineering )
ME    (Mechanical Engineering)
 12Computer    Science & Engineering (Information Security) (Self-supporting programme )Computer Science & Engineering/    Information Technology / Electronics and Communication EngineeringEntrance test for all candidatesNot Applicable
 13Industrial    Design (Self-supporting  Programme )All    Branches of Engineering and TechnologyEntrance test for all candidatesNot Applicable
 14Total    Quality Engineering and Management (TQEM) (Self-supporting  Programme )All    Branches of Engineering and TechnologyEntrance test for all candidatesNot Applicable

**A candidate must have cleared/ completed examinations, of  Professional Societies recognized by MHRD/ UPSC/ AICTE (e.g. AMIE by  Institution of Engineers-India, AMICE by the Institute of Civil Engineers-Indiaor I.E.T.E. Graduate Examination conducted by  the Institution of Electronics and  Telecommunication Engineers, New Delhi), in  the relevant branch and must possess at least five years research /  professional experience.

Note: However the Director PEC University  of Technology reserves the right to change the schedule without prior notice.  The candidates are advised to visit PEC   University of Technology website www.pec.ac.in from time to time for any  change in the schedule.

The candidates have to produce ORIGINAL  DOCUMENTS at the time of reporting at the institute. If offered admission, they will be  required to deposit the balance institute fee immediately and hostel fee (if applicable)

Eligibility Criteria for Admission

A  candidate for ME admission must possess qualifying degree with 60% marks with  relaxation of 5% marks for SC/ST and physically handicapped category  candidates. The percentage marks would be as awarded by the respective  university from which the candidate has graduated. In case of universities  awarding CGPA, the percentage marks would be determined as per the formula  specified by the university on its mark-sheet. In case no formula is specified,  the CGPA would be multiplied by a factor of 9 to obtain the percentage of  marks.

Candidates  who have not submitted their B.E./B.Tech. Degree with their applications may be  given provisional admission with an undertaking that they would be submitting  original provisional degree and original detailed marks certificates before the last date of registration as given in the academic calender of the institute. An undertaking form would be got filled from the candidate  to this effect.

NOTE:  Admission brochure will be available in June2014

Additional Requirements for Sponsored/Part-time Candidates

  1. An applicant for a Sponsored seat must have a minimum of two years full time work experience, as on the last  date of receipt of completed application form, in the sponsoring organization  viz. Central / State Government Autonomous Body / Public Limited Company; or as  a teacher in an AICTE approved institute. A sponsored candidate will be  considered for admission in only that M.E. programme for which he / she has  been granted permission by his / her parent department / organization. The main  activities of the sponsoring organization should relate to the programme in  which the candidate is seeking admission.
  2. An applicant seeking part-time admission must have a minimum of two years full time work experience, as on the  last date of receipt of completed application form, in the present organization  viz. a registered firm/company/industry/educational and research  institution/any Government Department or Government Autonomous Organization and  will be considered for admission to only that specialization for which he / she   has been granted permission by his / her parent department.
  3. Candidates sponsored by  Central/State Govt. Autonomous Bodies/Public Ltd. Companies/AICTE approved  institutes, for admission to ME Programmes, shall be allowed to attend the  classes only after they submit the certificate of proceeding on leave from  their parent organization.
  4. If a sponsored/part-time  candidate leaves his / her organization during the programme of study, his /  her name will be deemed to have been removed from the institute rolls from the  date he / she leaves that organization.

PEC GATE Cut Off Previous Years

S.No.StreamCut Off(Gate Score)
GENSCSTPH
MaxMinMaxMinMaxMinMaxMin
1.CSE729502452307193180261243
2.ECE633320494222323---
3.PE685106370103359---
4.VLSI645320494206323---
5.ME685124344202359---

Fee Structure

The institute fees include the  following:

Fees & Registration:

Non    Gate CandidatesFor    GATE qualified candidates(Excluding Self-Supporting M.E. Programme)Self-Supporting    M.E. Programme
One time (at Admission only)
Admission FeeRs.     3000Rs.     3000Rs.     3000
One time student service feeRs.     5000Rs.     5000Rs.     5000
Refundable DepositRs.     5000Rs.     5000Rs.     5000
Semester Fees
AcademicRs.    35000Rs.    15000Rs.  57,500
Other facilities & servicesRs.      5250Rs.      5250Rs.     5250
Total    payable at the time of admission (for day scholar)Rs.   53250Rs.   33250Rs.  75,750
Additional fee for hostel facilities at the time of    admission:
Refundable security                 Rs.       5000
Hostel fees (Annual)Rs.     14,000
Hostel and mess establishment charges    (Annual)Rs.     21,600
Mess advance Rs.        2500
Total    additional sum payable for hostel facilitiesRs.  43,100

Revision in the  fees, if any, will be notified on the website www.pec.ac.in.  Candidates are requested to check fee structure prior to attending counselling.

The mode of  payment is Cash / Demand Draft in favour of Director, PEC  University of Technology, Chandigarh.

Every student has  to be a part of the medical insurance policy for which a fixed premium is to be  paid.     

NOTE

  1. No GATE scholarship will be  awarded through the institute in case of M.E. Computer Science &  Engineering-Information Security, Industrial Design, TQEM.
  2. Some scholarships under  TEQIP-II are available for the non-GATE qualified candidates. The rules for the  same will be notified shortly.
  3. The total fee for TQEM  programme will be the same as for other self supporting programmes but spread over six semesters instead of four.

REFUND  RULES

  1. The refundable deposits will be fully  refunded whenever the student withdraws his admission from the institute.
  2. If a student after being granted  admission pays the fee but does not register with the institute on the prescribed  date, withdraws his admission and applies for refund, the entire fee paid by  him/her shall be refunded.
  3. If a student after being granted  admission pays the fee and registers with the institute on the prescribed date  but withdraws his admission later and applies for refund before the date of second  counseling for admission to Dean Academic Affairs with copy to  concerned Head of the Department, his/her admission fee of Rs.3,000/- will be  forfeited. The other fees paid by him/her (including hostel/mess fees in case  of a hosteller) will be refunded after making deductions proportionate to the  entire period starting from the month of registration to the month of  application for refund (part of each month being counted as a full month).
  4. A student who withdraws his/her seat  after the second and final counseling for admissions for the year has taken  place, will not be entitled to refund of any fee paid by him/her except for the  refundable deposits.

Syllabus

General Aptitude: Logical Reasoning: Deductive Logical Statements, Data Sufficiency, Logical Diagrams, Number and Letter Series, Age, Time and Calendar, Series Completion, Sitting Arrangement, Logical Sequence, Logical Matching, Logical Connections, Blood and Family Relationships, Coding and Decoding, Number Analogy, Series of Direction and Data Interpretation (Tables and Graphs). 

Communication skills: Paragraph Comprehension, Vocabulary Based (Synonyms & Antonyms), English Usage (Grammer): Subject Verb Agreement, Use of Modifier/Articles/Prepositions, Sentence Correction, Meaning – Usage Match, Sentence/Paragraph Completion, Conjunctions, Word Analogy and Reverse Analogy. 

Mathematics:  Function of one variable, simple double and triple integrals, Convergence and divergence of series, Tests of convergence , Raabe’s test, logarithmic test, Cauchy’s root test and Gauss test,  Periodic functions, Euler’s formula. Even and odd functions, Fourier series of different wave forms. Matrix algebra: Rank of a matrix. Elementary transformation, Gauss-Jordan method to find inverse of a matrix, Eigen values, Eigen vectors, Cayley-Hamilton Theorem, Hermitian and similar matrices. Concept of limit and continuity of a function of two variables, partial derivatives, total differential, differentiation of an implicit function, Jacobian Taylor’s and Maclaurin’s series. Maxima and minima of a function of two variables: Lagrange’s method of multipliers. Exact differential equation, Cauchy’s homogeneous and Legendre’s homogeneous linear differential equations. De-Moivre’s theorem and its application, Real and Imaginary parts of exponential , Logarithmic, circular, inverse circular, hyperbolic, inverse hyperbolic functions of complex variable, Summation of trigonometric series. Laplace transforms of various standard functions, transform of derivatives and integrals, Transform of multiplication and division by t, convolution theorem, Laplace transform of unit step function. 

Concept of materials: Common engineering materials, steel, plastic, ferrous and non ferrous metals, Timber, Bricks, Cements, Concrete,  conductor, semiconductor, insulator, magnetic, ferromagnetic and piezoelectric materials. Material selection criteria.

 Solid mechanics and strength of materials: Elastic constants, stress and strain, Hooks law, Bending moment and shear force analysis, principal stresses and strains, Mohr’s circle, simple bending theory, bending and shear stresses, torsion of circular shaft.

Fluid mechanics: Fluid properties, pressure, thrust, buoyancy, principle of conservation of mass, moment and energy, Flow kinematics, potential flow, applications of momentum and Bernoulli’s equation.

Environmental Engineering: Sources of water supply, Water quality standard, basic unit processes and operations of water treatment, drinking water standard, water requirement, sewage and its treatment, quality and characteristics of wastewater. Types of pollutants, sources and impacts, effects of air pollution and control, air quality standard and limits. Noise pollution and standard, impact of noise, permissible limit, measurement and control of noise.

Thermodynamics, Cycles and IC Engines: Open, closed and isolated systems, heat and work, zeroth, first and second law of thermodynamics, steady flow energy equation, application to non-flow and flow processes, properties of ideal gases and vapours, simple refrigeration cycle, Carnot cycle and Carnot heat engine, Joule cycle, Rankine cycle, Two stroke and four stroke Compression Ignition and Spark Ignition engines, Otto, diesel and dual cycles, pre-ignition and detonation, spark plug and injector, air standard efficiency.

Manufacturing Science and Engineering:  Basic manufacturing processes, their principles and applications, drawing and extrusion, die, investment and shall moulding, centrifugal casting, principle of fabrication processes, Arc and Gas welding, weldability, metal cutting processes, turning, drilling, boring, milling, grinding and finishing, production of flat surfaces, Basics concept on production planning and control.

Engineering Drawing and Graphics: Orthographic projection, projection of oblique areas, reading of orthographic views, missing views and missing lines, dimensioning and their rules, isometric projection, projection of point, line and planes, elements of descriptive geometry, true length, shape, minimum distance and true angle. Introduction to AutoCAD, Simple drawing on AutoCAD.

Mechanism and Machines:  Definition, difference between mechanism and machine, simple and compound mechanism, kinematic pairs and chain, belt drive, gear and simple gear train, flywheel and governor, their functions and applications.

Basic Electrical and Electronic Engineering:  Kirchoff’s laws, Thevenin’s, Norton’s and maximum power transfer theorems, application of theorems in AC & DC circuits; Series and parallel circuits,  resistance, inductance and capacitance and their combinations in series & parallel, power factor; Principle, construction and operation of transformer; characteristics of DC generators and DC motors; Principle of operation of single and three phase induction motor, equivalent circuit, torque-speed characteristics,; Principle of operation and applications of synchronous motor; Conductivity of semiconductor, theory of PN junction diode, and its V-I characteristics, breakdown in PN junction diode, special purpose diodes likes zener diode, tunnel Diode, LED. Half wave, full wave & bridge rectifiers, filters, operation of NPN and PNP transistors, transistor as an amplifier and oscillators; Operating principles of measuring instruments, moving coil permanent magnet instruments, moving iron instruments; Classification and application of different transducers: resistive, inductive, capacitive transducers, linear variable differential transducers (LVDT), piezoelectric transducers, Hall-effect transducers, photoelectric transducers; Number system, logic gates, logic system and circuits ,OR, AND, NOT, NAND, EX-OR, EX-NOR gates, different  types of flip-flops, R-S, J-K, D type, T type flip-flops.

Computer Science and Engineering: Elements of computer processing, Operating Systems DOS, UNIX, Windows and Linux, Problem solving-algorithms and flowcharts;  Hardware – CPU, Storage devices & media, VDU, I/O Devices.  Various software;  Basic program construction, Structure of a C program, Standard library functions arrays, Recursive techniques pointers, Array of pointers, memory allocation, Basic searching and sorting techniques, Elementary debugging tools and other IDE tools, Command line arguments, Compilation process. Console I/O (printf, scanf), preprocessor directives, Comments, Data types, Type conversions, Operators – arithmetic, Relational, Logical, Conditional, Increment/decrement, Library functions, Header files. Simple programs to demonstrate the use of constants, Variables, printf, scanf and operators.

Click Here for All PEC Admissions Click Here for All M.Tech Admissions with GATE Scores

Most of the visitors viewed this page for:

pec m tech admission 2014pec chandigarh application form 2014 for m techpunjab engineering college apply applications 2014 m tech in civil engineeringpec chandigarh entrance exam 2014pec chandigarh cut off for m tech

PEC ME / M.Tech Admission 2014 – Master of Engineering
1 vote, 5.00 avg. rating (79% score)

Stay Updated. Get notification direct in your inbox. Enter your email below:

, , , , ,
  • Kapil Rana

    Hellos Sir,

    my gate rank is 3368 gen CSE, wht r chances for pec….. give me other options too..

    • http://aglasem.com/ Anwesha Bose

      Hello Kapil
      Your chances in PEC for M.Tech are high. There is said to be a higher competition in ECE this year. To be on the safer side, do apply to two – three more institutes also.

      • Kapil Rana

        sir ant chances in IIITA, IIITB or COEP for me….Plzzzzzzz

        • http://aglasem.com/ Anwesha Bose

          PEC – A minimum score of 500 should be good enough for admission.
          IIIT A – Expected to go higher than PEC, at around 540
          IIIT B – Chances of being called for interview are high. But remember that more than 4 times the seats, students are called. So you have to do exceptionally well in the interview to get through.
          COE Pune – The same applies to COE Pune as IIIT B. Though chances are little less in COEP.

          • Kapil Rana

            wht about iiit delhi and iiitm gwalior

  • Aditi Jain

    helloo sir,
    my GATE rank is 5039,score474 CSE, GEN.. should i apply for NIT/PEC.. or suggest others

    • http://aglasem.com/ Anwesha Bose

      Hello Aditi
      Though chances in NITs is low, but you must participate in CCMT counselling. Pls apply to colleges such as PEC also.

  • Mathurapriya Rajagopalan

    Dear Sir,
    My GATE RANK is 4041.. General CSE.. Scored 504.. What are my chances of getting into NITs, IIITs, etc?

    • http://aglasem.com/ Anwesha Bose

      Hello Mathurapriya
      I am afraid that chances in NITs or IIITs would be less in the first two rounds.
      You may get IIITDM, NIT Arunachal Pradesh, NIT Hamirpur.

  • atul sharma

    Hlo
    My rank is 7933
    Gate score 415 civil engg
    How many chances to get nit….
    Gen

    • http://aglasem.com/ Anand Meena

      You have very good chances of getting admission in NITs, in top NITs you may not get in initial rounds but high chances of getting those as well in later rounds. Are you looking for any particular specialization?

      • atul sharma

        Ya prefrd specialzation are…construction mngmnt @ nit warangal
        Urban plannig @ nit surat
        Or highway engg.

        • http://aglasem.com/ Anand Meena

          You have less chances of getting construction in NIT Warangal. You can get Urban Planning at NIT Surat

      • atul sharma

        Ya construction managmnt @ nit warangal
        Urban planning @ nit surat
        And highway engg @ pec

  • tarun

    sir my 2014 gate score is 320 (cse) plz tell which college could i get?

    • http://aglasem.com/ Anand Meena

      I am afraid that IITs and NITs are difficult to get in CS for this rank. You should keep your options open and also apply in private colleges.

  • shubam salathia

    hello
    my gate score is 444 EE
    rank is 6600
    can i get NIT or PEC???

    • http://aglasem.com/ Anwesha Bose

      Hello Shubham
      There are chances, though I cannot say whether you will get in first round of counselling. Pls do apply to a few other colleges also.

  • neha

    sir,
    my gate score is 292 in ece category- SC rank- 47382.
    can i get pec, punjab university or thapar ? any chance in pec specially ?

    • neha

      please replyyyy…in which college among these…i can get admission.

    • http://aglasem.com/ Anwesha Bose

      There are chances in PEC and Thapar as well.

  • manjeeta

    Gate score 377 ec obc …ny chance in pec?

    • http://aglasem.com/ Anwesha Bose

      Yes, you have chances.

      • manjeeta

        Is it cnfrm or I shud hav a bck up plan?

        • manjeeta

          N in ec pec nly consider gate score??is dere ny written test for non gate candidates?

          • http://aglasem.com/ Anand Meena

            yes it conduct exam for non gate candidates

  • smiti

    sir the cut offs u given above for pec are of which year ?

    • http://aglasem.com/ Anwesha Bose

      They are most probably of 2012. The year has not been specified.

  • Harish Raj

    hi,i need yr guidance..my gate Rank-2809, Score-555. cat-obc.,branch-electrical.. Can i get nit/dce/nsit/ism/diat/coep pune/pec ??please help me regarding admission in best college 4 m.tech…

    • http://aglasem.com/ Anand Meena

      Yes there are good chances of getting admission at this rank in NITs (Bhopal & Similar). Also you have very well chances in getting other preferred institutes as per your choice.

  • Maverick Singh

    hi, i have written GATE-AE last year and my score is 610 (valid from march 2014 to march 2015). on basis of last years GATE i have got admission @IIT but now i want to join mech. deptt. @ PEC. will it be possible?? i haven’t written GATE-14

    • http://aglasem.com/ Anand Meena

      You use the previous year gate score to get admission. As such its not specified that you cannot take admission in PEC if you are already studying in IIT. However this is not a general case no detailed information is available to us you need to talk to PEC once for the same.

      • Maverick Singh

        thank you sir for your timely reply

  • ramesh

    sir ihave written gate AE in 2013 and my gate score is 450 can i get admission in pec mechanical branch an is there any scope for non gate candidates based on written test and iam under general category

    • http://aglasem.com/ Anand Meena

      Yes you can take admission on the basis of previous year score in PEC. you can get admission at this rank.

  • sumedha

    i have scored 340 marks in Gate EE, can i get power systems at PEC or Thapar ?

    • http://aglasem.com/ Anand Meena

      In both you have 80% chances of getting admission.

  • kulwinder

    i have scored 348 score in gate cse is there any chances of pec chd or punjab university chd

    • http://aglasem.com/ Anand Meena

      Its little tough in CSE if you are from General Category, for other branches there was possibility?

  • mayank

    sir,plz tell me that what are my chances of nits and pec,my gate score is 606(me) and rank is 4539

  • sumit

    hello sir
    my gate score is 364(ME) and rank is 24440 sc category. can i get admission in PEC or NITS ?

    • http://aglasem.com/ Anand Meena

      You have chances of getting in PEC, not very good but you can get in later rounds. Also the same case with NSIT.

  • Swatantra

    hello sir
    my gate score is 587(ME) and rank is 5319 OBC category. can i get admission in IITs, PEC or NITS ?

    • http://aglasem.com/ Anand Meena

      You have very good score and you have fair chances of getting IITs, top NITs and PEC as well.

  • asmita

    hello sir
    my gate 2014 score is 446(ece) with 15553 rank (General category).what are my chances of getting admsn to nits or PEC (chandigarh).which one is better PEC or thapar university?

    • http://aglasem.com/ Anand Meena

      You have fair chances of getting PEC as well as Thapar University. Both are equally good, however PEC is an government institution.

      • asmita

        getting pec is confirmed or not???
        is there any other better option?

        • http://aglasem.com/ Anand Meena

          Confirmation cannot be give brother but looking as their cut offs, admission procedure, applications etc you have good chances in these colleges. you can also apply in DTU, NIT, IITD

  • monika

    hello sir, my gate score is 344 (EE) gen category…can i get admission in any good nit..or any other good colg…plz suggest..

    • http://aglasem.com/ Anand Meena

      Its little tough to get NITs initially, you may get by the ending of counselling. Try in good colleges like PEC, Thapar, DTU, NSIT. At least keep 4-5 options open for you.

  • Vannistel

    Sir/Maam
    I have a GATE score of 422 EE branch GEN category in GATE 2014
    How realistic are my chances in PEC and Thapar?
    Preferably PEC

    • http://aglasem.com/ Anand Meena

      You have fair chances of getting admission in both

      • Vannistel

        Thank you sir!
        and apart from these can i realistically get any other good college?

        • http://aglasem.com/ Anand Meena

          Yes you can equally good colleges like DTU, NSIT, IITD

  • tarun

    heloo…my cse gate score is 380…..air is 10621 and general category……plz tell if i could get addmission in PEC,THAPAR,PU…..plzzzz do tell something….

    • http://aglasem.com/ Anand Meena

      Its tough to get CS at this rank. CS cut offs goes very high. Keep your options open for private universities also.

  • prarthana

    hello sir/mam’m .. My gate score is 440 and rank is 6521 cse, GEN..please tell if i could get admission in any of thapar,pec, rvce ,pune university,cusat. Plz guide me which college i can get at this rank

    • http://aglasem.com/ Anand Meena

      In CS cut offs are always high for all the colleges, its seems difficult to get CS at this rank in PEC/Thapar There are some chances for others but keep your other options open including private colleges

  • rahul

    sir my gate score is 498(ece).
    will i b able to get admission in pec.?
    do they give stiphen of 8000?

    • http://aglasem.com/ Anand Meena

      You have very good chances of getting admission in PEC. Stipend is provided as per government norms.

  • Supreet Kaur Sidhu

    sir my gate score is 343 (ece ) and rank is 32324, GEN…..please tell if i could get admission in any of thapar,pec, rvce ,pune university,cusat. Plz guide me which college i can get at this rank

    • http://aglasem.com/ Anand Meena

      Yes for ECE you have changes of getting admission in all of the following. However keep your options open as this year more competition for EC/CS/EE

  • leena

    hello sir my gate score is 418(civil) and rank is 7818, GEN…..please tell if i could get admission in pec. Plz guide me which college i can get at this rank…please reply me……

    • http://aglasem.com/ Anand Meena

      You can get NITs as well as PEC/Thapar

  • ANU

    sir,
    my gate score is 280 in CSE category- SC rank- 22309
    can i get pec, punjab university or thapar ? any chance in pec specially ?

    • http://aglasem.com/ Anand Meena

      There are limited seats and there are less chances, however you should try if you can get any college in later rounds or spot round.

  • leena

    which is better for m.tech in civil… nit or pec

    • http://aglasem.com/ Anand Meena

      If you get top 5 NITs then they are good else PEC

  • anuj

    sir my score is 359 civil nd m a sc.d i hv a chance nd evn u hv any idea bout iit cooleges

    • http://aglasem.com/ Anand Meena

      you have chances of getting shortlisted rest depends on the written exam and interviews.

  • atul sharma

    What about construction managemnt @ nit warangal
    Urban planning @ nit surat
    & highway engg @ pec

    • http://aglasem.com/ Anand Meena

      please tell score and category as well

  • http://aglasem.com/ Anand Meena

    You can get NITs in later rounds. Please check the cut offs of ccmt for the same. IN DTU/NSIT/PEC etc etc you have fair chances.

  • atul sharma

    Gate score 415
    Rank 7933
    Genral
    What aboyt construction managmnt @ nit warangal
    Urban planning @ surat
    And transportation or highway engg @ pec
    Civil engg.

    • http://aglasem.com/ Anand Meena

      You can get NIT Surat and PEC

  • Rahul_san

    Hello Sir,
    Gate score – 504, Rank – 4190, branch- electrical
    Can I get in any nit?

    or What about PEC, DTU, Bit mesra?

    Any chance in Bits pilani/goa/hyd?

    • http://aglasem.com/ Anand Meena

      There are less chances in NITs, PEC or Pilani, but you have chances in DTU, BIT Mesra, Goa. To be on the safer side apply in your state colleges as well.

  • ritu

    which is better for m.tech (ECE) thapar university or punjab university chandigarh ?

    • http://aglasem.com/ Anand Meena

      both are almost equal. Can you tell me specific college name of PU

  • nik

    i have 292 score with 20.58 marks AIR 47382 in ECE SC category . any chance in PEC, Punjab university or Thapar ?

    pls reply

    • http://aglasem.com/ Anand Meena

      Less chances in PEC, Thapar but some chances in PU Colleges

  • madhuri

    Hello Sir,
    I got marks 23.83 score-334 and AIR-14871 in CSE OBC category..
    any chances for going M tech (or to go for Master Engineering)
    can u suggest for which college i should try…

    • http://aglasem.com/ Anand Meena

      Good colleges like IITs, NITs, PEC, DTU etc etc are tough. Also it seems difficult in good private colleges like Thapar. You should apply in your state colleges in which state quota is also applicable and private colleges in your state as well.

  • sukhjinder kaur

    sir my gate 2014 score is 321 and sc category.. any chances of getting admission in pec.. plz reply sir…

    • ankit

      try in lower nits..at spot round u may get..nits are far better than pec

      • sukhjinder kaur

        ok sir.. thnx alot…. :)

    • http://aglasem.com/ Anand Meena

      Please tell your branch.

      • sukhjinder kaur

        sir, its cse….
        sir please reply.. i’ll be waiting.. any possibility in pu, pec or nits.. please tell me…

  • kulwinder

    my marks are 22.16 and nrmlized marks arr 23.16 in gen category from ece ……am i qualified for gate or not

    • http://aglasem.com/ Anand Meena

      Its written in your rank card.

  • xyz xxx

    gate score in gate 2014 (ee) -420 general category
    rank 7820
    any chance of getting coep(even mechatronics), dtu (nanotech or electrical) or pec,pu?

    • http://aglasem.com/ Anand Meena

      There is tough competition for EE but you have less chances of getting mentioned colleges but you should apply as there are always chance in last rounds. Also keep your options open for private institutes as well.

  • punit

    my marks are 27.86 and gate score is 377 in general category …. any chances of getting admission
    in pec or pu

    • http://aglasem.com/ Anand Meena

      please tell your stream!

  • amit

    hi.
    my rank is 4295
    score- 603
    marks 50.33
    can i get any nit????

    • http://aglasem.com/ Anand Meena

      please tell your branch.

  • kumari

    Helloo sir,
    my GATE 2014 score is 343 in EC,normalized marks-24.94,rank-32526 under GEN category…cn i get admission in m.tech using this score???kindly suggest me the better option if available…

    • http://aglasem.com/ Anand Meena

      It is a little difficult to get admission in electronics stream for general category do apply in state colleges and some good private colleges

      • kumari

        k sir…thnku soo much…..can you please suggest me the good private colleges name which have various specialization in electronics……and have the chances of getting those colleges using my gate score….

      • kumari

        plz do rply sir……

  • RAHUL

    Sir, my gate score is 364 and AIR is 24454 in MECHANICAL ENGINEERING . I belong to SC category. Can I get admission in NITs???

    • http://aglasem.com/ Anand Meena

      You may get NITs like silchar and slightly better NITs by last rounds

  • Akhil Sharma

    Hello Sir, my Gate score is 576 and AIR is 5482 in ECE. I belong to General Category. What are good options for me.? I want to do m tech in VLSI… Can i get PEC and Thapar? Or any other good NIT.? pls help…

    • http://aglasem.com/ Anand Meena

      Chances are less in VLSI. May get PEC and Thapar.

  • reetika bansal

    hello sir ,my AIR 5355 ,cs branch ,gate score -467,general category, is there any chances for pec or thapar, plz suggest howz is pec information security branch for cs , i should prefer pec with information security branch or thapar with software enginnering or computer applications if i am getting , plz suggest very confused..

    • http://aglasem.com/ Anand Meena

      Very less chances in CS branch. Competition is tough. Keep options open for state colleges and private institutes. Do apply in PEC, Thapar you may get in later rounds if there are vacancies.

  • lucky

    hello sir, my Gate score is 354 ECE, do i have chance of getting in pec or thapar? plz reply if any othr options

    • http://aglasem.com/ Anand Meena

      Chances are less.

  • namita

    hello sir, my Gate score is 398 ECE, CAT-GEN, do i have chance of getting admission in pec chd , PU chd or thapar? are there any options? plz reply

    • http://aglasem.com/ Anand Meena

      You may apply but chances are less.

  • Roopal

    Sir, my Gate score is 412, Branch ECE, category-General, rank-19818. Do i have any chances of getting admission in pec chd, punjab university?or suggest some other options…

    • http://aglasem.com/ Anand Meena

      Chances are less but you can apply, if vacancies are there in later rounds you may get lucky.

  • niranjan raj

    sir. my gate score is 460 , ec, general category ,,,, can i get any lower nit ,, is lower nit is preferable over pec, thaparetc, any chances in daiict, please reply

    • http://aglasem.com/ Anand Meena

      Chances are less but you can apply, if vacancies are there in later rounds you may get lucky..

  • niranjan raj

    any chances for dtu , nsit or any iiit… sir please do reply

    • http://aglasem.com/ Anand Meena

      If state quota is applicable then you can try else less chances.

  • rajesh

    my score is 425 ME stream, OBC…suggest me for better M.Tech admission

    • http://aglasem.com/ Anand Meena

      chances are little less. keep your options open for state colleges and pvt colleges as well.

  • Sachin

    sir didnot qualify gate (General) EE
    what are chances as a non Gate candidate for PEC
    considering power system for my masters

    • http://aglasem.com/ Anwesha Bose

      Hello Sachin
      If you are applying through non GATE stream, then your shortlisting depends on the application and your profile approval. Nothing can be said at the moment.

  • niranjan raj

    can i get pec or thapar ,, gate no. 460,,, suggest good colleges general category

    • http://aglasem.com/ Anwesha Bose

      Hello Niranjan
      Pls tell stream.

      • niranjan raj

        ECE , SIR PLEASE DO REPLY WAITING

  • vikas

    my gate score is 474, ece , general, rank 12552. any chances of mtech in pec / nit / iiit or any other good clg.

    • http://aglasem.com/ Anwesha Bose

      Chances seem a little less. Pls apply to state quota applicable private colleges.

  • shubham

    sir my gate score is 348 and cat obc my branch is mechanical there is possibilty any govt college like pe pu etc

    • http://aglasem.com/ Anwesha Bose

      I am afraid slightly less chances. Pls apply, however keep your options open for other private colleges also.

  • ramesh

    Sir my GATE score is 450 IN AE can I get any NITs or pec mechanical branch and iam in general Category

    • http://aglasem.com/ Anwesha Bose

      Hello Ramesh
      Though your score is good, but chances for students below 550, cannot be assured at the moment.

  • sandeep

    sir , my gate score is 376 civil (OBC) , sir what are my chances in nit’s and PEC.

    • http://aglasem.com/ Anwesha Bose

      Hello Sandeep
      At this moment, chances seem a little less. Though we expect a lot of top rankers to go for PSUs placements, but with the high scores this year competition is bound to be very tough.

      • Sarita

        Hello Sir, My gate Score is 516,ECE,General. What are my chances in PEC?
        Also pls let me know which other colleges I should go for?
        Thanks in advace

  • Sarita

    Hello Sir, My gate Score is 516,ECE,General. What are my chances in PEC and NIT’s?
    Also pls let me know which other colleges I should go for?
    Thanks in advace

  • Gaurav

    Hello Sir, My Gate Score is 560,CSE,General,Rank-2571. What are my chances in NIT’s & PEC ?Also pls let me know which other colleges I should go for?
    Thanks in advace

  • praneeth

    hello sir, my gate score is 612,ec stream…what are my chances to get a seat in nits…and pls tell me the central universites that i can get for this rank

  • amit keena

    sir my GATE SCORE IS 431 (GENERAL CATEGORY) IN MECHANICAL STREAM,,,CAN I GET PEC CHANDIGARH FOR M.TECH.

  • bikky routh

    sir my gate score is 339
    stream- electrical engineering
    category-SC
    is der any chance to ger nit , pec or any govt institute

    • bikky routh

      sir could you inform that when will the form of pec be declare