Graduate Aptitude Test in Engineering (GATE) for Production and Industrial Engineering (PI) was held on February 01, 2020. It was held in session 2, in computer based mode. IIT Delhi will announce the result of GATE PI paper on March 16, 2020, and along with it the cut off for the exam shall also be disclosed.
However, candidates who are eager to know their cut off for the PI exam can have a look at the previous year GATE cut off. Since cut off is prepared on the basis of various factors, it changes every year. Yet, difference is never too vast. Hence, candidates can have a look at GATE PI cut off for past year to know how much minimum marks they should expect this year.
Contents
GATE 2020 Production and Industrial Engineering (PI) Cut Off
Production and Industrial Engineering (PI) is one of the oldest subject paper for GATE. We have provided previous year GATE PI cut off for past 5 years. Check below.
| Year | Gen | OBC-NCL | SC / ST / PwD |
| 2019 | 32.2 | 29 | 21.5 |
| 2018 | 32 | 28.8 | 21.3 |
| 2017 | 33.10 | 29.70 | 22.00 |
| 2016 | 26.4 | 23.7 | 17.5 |
| 2015 | 26.82 | 24.14 | 17.88 |
What shall be the Expected GATE 2020 PI Cut Off?
Well, if we analysis the table above, we will see that until 2017 the cut off for GATE PI used to be very low in the range of 25 – 26. However, 2017 onwards, the cut off started be in range of 30’s. Hence, the expected cut off range for GATE Production and Industrial Engineering this year, is as follows:
| Year | Gen | OBC-NCL | SC / ST / PwD |
| 2020 | 30-35 | 25-30 | 20-25 |
GATE Previous Year Cutoff for Other Subjects
Candidates can check the cutoff score for the rest of the subjects as per last year from below:
| Paper Code | General | OBC | ST / SC / PwD |
| EE | 39.6 | 35.6 | 26.4 |
| CE | 28.2 | 25.4 | 18.8 |
| ME | 34.1 | 30.7 | 22.7 |
| CS | 29.5 | 26.6 | 19.7 |
| EC | 26.7 | 24 | 17.8 |
| PE | 49.9 | 44.9 | 33.3 |
| CY | 32 | 28.8 | 21.3 |
| CH | 34.8 | 31.3 | 23.2 |
| XE | 26.7 | 24 | 17.8 |
| BT | 35.9 | 32.3 | 23.9 |
| AE | 33.5 | 30.2 | 22.3 |
| TF | 40.1 | 36.1 | 26.7 |
| AG | 28.3 | 25.5 | 18.9 |
| AR | 41 | 36.9 | 27.3 |
| EY | 37.1 | 33.4 | 24.7 |
| GG | 44.5 | 40.1 | 29.7 |
| IN | 31.9 | 28.7 | 21.3 |
| MA | 25 | 22.5 | 16.7 |
| MN | 31.5 | 28.4 | 21 |
| MT | 53.5 | 48.1 | 35.7 |
| PH | 25.2 | 22.7 | 16.8 |
| PI | 32.2 | 29 | 21.5 |
| ST | 32.5 | 29.2 | 21.7 |
| XL | 36.7 | 33 | 24.5 |
Factors on which GATE 2020 Cutoff is Decided
There are a lot of factors which affect the cut off for GATE. Some of these factors directly affect the cut off, whereas, other affect it inversely. Few of these important factors are as follows:
- Candidates who appeared for the exam
- The difficulty level of the exam
- Total candidates registered
- Availability of seats
- Past year cutoff trends
GATE 2020
Graduate Aptitude Test in Engineering (GATE) 2020 is conducted for admission in M.Tech, M.Arch, PhD courses and for various PSU recruitments. IIT Delhi is the conducted body of GATE for academic session 2020. It is a national level exam conducted in online mode on the rotationally by seven IITs Bombay, Delhi, Kanpur, Guwahati, Kharagpur, Madras and Roorkee) and the Indian Institute of Science (IISc), Bangalore.
To get fastest exam alerts and government job alerts in India, join our Telegram channel.
