Skip to content

Ray Optics Notes for NEET and JEE Main 2027: Key Points and PDF

Conducted by NTA Scope National

Ray Optics and Optical Instruments is Chapter 9 of NCERT Class 12 Physics Part II and part of Unit 16, Optics, in both the NEET UG and JEE Main syllabi. These notes cover spherical mirrors, refraction, total internal reflection, lenses and lens maker’s formula, power, prisms, the microscope and telescopes, with formula tables and a free notes PDF.

Ray Optics and Optical Instruments Notes for NEET and JEE Main

Section-wise key points from NCERT Chapter 9, formula tables, high-yield facts and common mistakes for 2027 revision.

Ray Optics and Optical Instruments at a Glance

ItemDetails
Syllabus unitNEET UG 2026 and JEE Main 2026: Unit 16, Optics
Exams that cover itBoth NEET UG and JEE Main (Paper 1); the topic is listed in the 2026 syllabus of each
NCERT textbookPhysics Part II, Class 12, Chapter 9 (rationalised book)
Other chapter in the unitWave Optics (Chapter 10)
Syllabus topicsReflection of light, spherical mirrors, mirror formula; refraction at plane and spherical surfaces; thin lens formula and lens maker formula; total internal reflection and its applications; magnification; power of a lens; combination of thin lenses in contact; refraction through a prism; microscope and astronomical telescope (reflecting and refracting) and their magnifying powers
Official chapterNCERT Chapter 9
Notes PDFView PDF (AglaSem Class 12 notes for Electromagnetic Waves and Optics)

The topic list follows the NEET UG 2026 syllabus released by the National Medical Commission (NMC) on 22 December 2025 and the JEE Main 2026 syllabus released by NTA on 31 October 2025, which stay the reference until the 2027 syllabi are out. Full lists: NEET syllabus and JEE Main syllabus.

Reflection by Spherical Mirrors

For spherical mirrors, the mirror equation 1/v + 1/u = 1/f with the Cartesian sign convention works for every case, concave or convex, real or virtual image.

  • Cartesian sign convention: all distances are measured from the pole (mirror) or optical centre (lens); distances along the incident light are positive, against it negative; heights above the principal axis are positive, below negative.
  • Paraxial rays are close to the pole and make small angles with the axis; the formulas assume them.
  • Focal length f = R/2. f is negative for a concave mirror and positive for a convex mirror.
  • Magnification m = h′/h = −v/u. Real images are inverted (m negative); virtual images are erect (m positive).
  • Convenient rays: a ray parallel to the axis passes through (or appears to come from) F; a ray through C retraces its path; a ray through F becomes parallel; a ray at the pole reflects symmetrically.
  • Covering half of a mirror still gives the full image, only with lower intensity (half, in NCERT Example 9.1).
  • A convex side-view mirror makes the image of an approaching object appear to speed up as the object comes closer (NCERT Example 9.4).

Refraction at a Plane Surface

Snell’s law says sin i/sin r = n₂₁, the refractive index of medium 2 with respect to medium 1; n₂₁ depends on the pair of media and the wavelength, not on the angle of incidence.

  • If n₂₁ > 1, the ray bends towards the normal (medium 2 is optically denser); if n₂₁ < 1, it bends away.
  • n₁₂ = 1/n₂₁ and n₃₂ = n₃₁ × n₁₂.
  • Optical density is not mass density: turpentine is less dense than water by mass but optically denser.
  • A parallel-sided glass slab gives an emergent ray parallel to the incident ray, with a lateral shift but no deviation.
  • Apparent depth (viewed near the normal) = real depth / refractive index, which is why a tank of water looks shallower.

Total Internal Reflection and Its Applications

Total internal reflection happens when light goes from a denser to a rarer medium at an angle of incidence greater than the critical angle; then no light is refracted and all of it is reflected.

  • Critical angle i_c: the angle of incidence for which the angle of refraction is 90°. The refractive index of the denser medium with respect to the rarer one is n₁₂ = 1/sin i_c.
  • Ordinary reflection always loses some light by transmission; in total internal reflection there is no transmission.
  • Totally reflecting prisms bend light by 90° or 180°, or invert an image without changing its size. This needs a critical angle below 45°, true for crown glass and dense flint glass.
  • Optical fibres have a core of higher refractive index than the cladding; light travels by repeated total internal reflection even when the fibre is bent. Silica fibres can transmit more than 95% of light over 1 km.
  • Uses of optical fibres: audio and video signals over long distances, light pipes to examine internal organs such as the oesophagus, stomach and intestines, and decorative fibre lamps.
  • The sparkle of diamond (i_c about 24.4°) and mirages are natural examples of total internal reflection.
MediumRefractive indexCritical angle (with air)
Water1.3348.75°
Crown glass1.5241.14°
Dense flint glass1.6237.31°
Diamond2.4224.41°

Refraction at Spherical Surfaces and by Lenses

Applying refraction at a single spherical surface twice gives the lens maker’s formula, and from it the thin lens formula 1/v − 1/u = 1/f.

FormulaExpressionNotes
Single spherical surfacen₂/v − n₁/u = (n₂ − n₁)/RLight goes from medium n₁ to n₂; valid for any curved spherical surface
Lens maker’s formula1/f = (n₂₁ − 1)(1/R₁ − 1/R₂)n₂₁ = refractive index of lens material relative to the surrounding medium; true for concave lenses too (R₁ negative, R₂ positive)
Thin lens formula1/v − 1/u = 1/fValid for convex and concave lenses, real and virtual images
Magnification (lens)m = h′/h = v/uPositive for erect, virtual images; negative for inverted, real images
PowerP = 1/f (f in metres)Unit dioptre (D), 1 D = 1 m⁻¹; positive for converging, negative for diverging lenses
Lenses in contact1/f = 1/f₁ + 1/f₂ + 1/f₃ + …; P = P₁ + P₂ + P₃ + …Algebraic sum; total magnification m = m₁ m₂ m₃ …
  • A lens has two foci, F and F′, equidistant from the optical centre; the one on the side of the source is the first focal point.
  • A ray through the optical centre goes undeviated; a ray parallel to the axis passes through F′ (convex) or appears to come from F (concave).
  • Power +2.5 D means a convex lens of focal length +40 cm; −4.0 D means a concave lens of focal length −25 cm.
  • A lens placed in a liquid of the same refractive index (e.g. n = 1.47, like glycerine) has 1/f = 0 and seems to disappear (NCERT Example 9.6).
  • Focal length depends on the surrounding medium: a glass lens (n = 1.5) of f = 20 cm in air has f ≈ 78.2 cm in water (n = 1.33), from NCERT Example 9.7.
  • Lens combinations are used in cameras, microscopes and telescopes to get the required magnification and a sharper image.

Refraction Through a Prism

In a prism the angle of deviation depends on the angle of incidence and is least when the ray passes symmetrically through the prism.

  • r₁ + r₂ = A, and deviation δ = i + e − A.
  • Any deviation except the minimum corresponds to two values of i (i and e can be interchanged).
  • At minimum deviation D_m: i = e, r₁ = r₂ = A/2, and the ray inside is parallel to the base.
  • Refractive index: n₂₁ = sin[(A + D_m)/2] / sin(A/2). Measuring A and D_m gives the refractive index.
  • Thin prism: D_m = (n₂₁ − 1)A, so thin prisms deviate light only a little.
  • Dispersion is the splitting of light into its constituent colours.

Optical Instruments: Microscope and Telescope

A simple microscope is a single convex lens of short focal length; a compound microscope and a telescope each use an objective and an eyepiece, and their magnifying powers depend on the focal lengths.

InstrumentMagnifying powerKey points
Simple microscope, image at near pointm = 1 + D/f (D ≈ 25 cm)Object within f; erect, virtual, magnified image; for m = 6 you need f = 5 cm
Simple microscope, image at infinitym = D/fOne less than at the near point but more comfortable for a relaxed eye; realistic maximum about 9
Compound microscope, image at infinitym = m_o × m_e ≈ (L/f_o)(D/f_e)L = tube length (between second focal point of objective and first focal point of eyepiece); final image inverted; example f_o = 1 cm, f_e = 2 cm, L = 20 cm gives m = 250
Refracting (astronomical) telescopem = f_o/f_eObjective has large focal length and large aperture; tube length f_o + f_e; final image inverted
  • Compound microscope: objective (near the object) forms a real, inverted, magnified image near the focal plane of the eyepiece, which acts as a simple magnifier. Both focal lengths should be small.
  • Terrestrial telescopes add a pair of inverting lenses to give an erect image.
  • Light-gathering power depends on the area of the objective, and resolving power on its diameter, so large objectives are preferred.
  • The largest lens objective in use is 40 inch (about 1.02 m) at Yerkes Observatory, USA; such lenses are heavy and hard to make free of chromatic aberration.
  • Modern telescopes use a concave mirror objective (reflecting telescope): no chromatic aberration, lighter, and supported over the whole back surface.
  • Cassegrain telescope: a convex secondary mirror sends light through a hole in the primary mirror; it gives a large focal length in a short tube.
  • India’s largest telescope is the 2.34 m Cassegrain reflector at Kavalur, Tamil Nadu (Indian Institute of Astrophysics); the Keck telescopes in Hawaii have 10 m reflectors; Mt Palomar has a 200 inch (about 5.08 m) mirror.

Most-asked Facts for NEET and JEE Main: Ray Optics and Optical Instruments

Revise these one-line facts and formulas from the NCERT chapter just before the exam.

  • Mirror: 1/v + 1/u = 1/f, f = R/2, m = −v/u. Lens: 1/v − 1/u = 1/f, m = v/u.
  • f is negative for a concave mirror and positive for a convex mirror; f is positive for a convex lens and negative for a concave lens.
  • Lens maker’s formula: 1/f = (n₂₁ − 1)(1/R₁ − 1/R₂).
  • Power P = 1/f in metres; 1 D = 1 m⁻¹; lenses in contact: P = P₁ + P₂ + …
  • sin i_c = 1/n for light going from a medium of index n into air; diamond i_c ≈ 24.4°, water 48.75°.
  • Optical fibre: core of higher refractive index than cladding; works by total internal reflection.
  • Apparent depth = real depth / n (viewing near the normal).
  • Prism: δ = i + e − A; at minimum deviation r = A/2 and n = sin[(A + D_m)/2]/sin(A/2); thin prism D_m = (n − 1)A.
  • Simple microscope: m = 1 + D/f (near point), D/f (infinity).
  • Compound microscope: m ≈ (L/f_o)(D/f_e); telescope: m = f_o/f_e, length f_o + f_e.
  • Reflecting telescopes have no chromatic aberration; the Cassegrain design uses a convex secondary mirror.

Common Mistakes to Avoid

Watch for these mix-ups when you answer questions on this chapter.

  • Dropping the sign convention. Put u, v, f and R in with their Cartesian signs every time; a concave mirror has negative f.
  • Using the mirror formula for a lens. Mirror: 1/v + 1/u = 1/f; lens: 1/v − 1/u = 1/f.
  • Thinking that covering half of a lens or mirror cuts off half the image. The whole image forms, only dimmer.
  • Expecting total internal reflection when light goes from a rarer to a denser medium. It needs denser to rarer and i greater than i_c.
  • Confusing optical density with mass density (turpentine is optically denser than water but lighter).
  • Calculating power with f in centimetres. P in dioptre needs f in metres.
  • Assuming a lens keeps its focal length in water. Focal length depends on the refractive index of the lens relative to the surrounding medium.
  • Writing the telescope tube length as f_o − f_e or the magnifying power as f_e/f_o. For normal adjustment it is f_o + f_e and f_o/f_e.
  • Mixing up the microscope and telescope objectives: a microscope objective has a small focal length, a telescope objective a large one.

Download the AglaSem notes PDF that covers Ray Optics and Optical Instruments (AglaSem Class 12 notes for Electromagnetic Waves and Optics: key notes and important questions with answers) free: View PDF

Physics Notes for NEET and JEE Main: All Chapters

All chapters with key points and notes PDFs are on the Physics notes for NEET and JEE Main page.

Ray Optics and Optical Instruments Notes for NEET and JEE Main FAQs

Which NCERT chapter is Ray Optics and Optical Instruments?
It is Chapter 9 of the NCERT Class 12 Physics Part II textbook (rationalised edition), the first chapter of Part II. Wave Optics (Chapter 10) completes the Optics unit.
Is Ray Optics in the NEET 2027 and JEE Main 2027 syllabus?
Yes as per the latest syllabi: it is part of Unit 16, Optics, in both the NEET UG 2026 syllabus (NMC, 22 December 2025) and the JEE Main 2026 syllabus (NTA, 31 October 2025). The 2027 syllabi have not been released yet.
What is the difference between the mirror formula and the lens formula?
The mirror formula is 1/v + 1/u = 1/f with m = −v/u; the thin lens formula is 1/v − 1/u = 1/f with m = v/u. Both use the Cartesian sign convention.
What is the condition for total internal reflection?
Light must travel from an optically denser medium to a rarer one, and the angle of incidence must be greater than the critical angle, where sin i_c = n(rarer)/n(denser).
What is the magnifying power of an astronomical telescope?
For the final image at infinity it is m = f_o/f_e, and the length of the tube is f_o + f_e. The objective has a large focal length and aperture; the eyepiece a small focal length.
Official website: neet.nta.nic.inNTA publishes notices, admit cards and results here
Visit

Discussion about NEET UG 2027

?

Loading comments…